A comprehensive simulation approach for pollutant bio-transformation in the gravity sewer

A comprehensive pollutant transformation model for sewer systems is established. The model comprises fermentation, sulfate reduction and ammonification processes. Biochemical reactions related to distinct carbon sources are depicted in the model. Pollutant transformation is attributed to different biochemical reaction processes. Presently, several activated sludge models (ASMs) have been developed to describe a few biochemical processes. However, the commonly used ASM neither clearly describe the migratory transformation characteristics of fermentation nor depict the relationship between the carbon source and biochemical reactions. In addition, these models also do not describe both ammonification and the integrated metabolic processes in sewage transportation. In view of these limitations, we developed a new and comprehensive model that introduces anaerobic fermentation into the ASM and simulates the process of sulfate reduction, ammonification, hydrolysis, acidogenesis and methanogenesis in a gravity sewer. The model correctly predicts the transformation of organics including proteins, lipids, polysaccharides, etc. The simulation results show that the degradation of organics easily generates acetic acid in the sewer system and the high yield of acetic acid is closely linked to methanogenic metabolism. Moreover, propionic acid is the crucial substrate for sulfate reduction and ammonification tends to be affected by the concentration of amino acids. Our model provides a promising tool for simulating and predicting outcomes in response to variations in wastewater quality in sewers.     

Green technologies for sustainable environment: an introduction

Environmental Science and Pollution Research -     

Quantitative determination of hexamethylene diisocyanate (HDI), 2,4-toluene diisocyanate (2,4-TDI) and 2,6-toluene diisocyanate (2,6-TDI) monomers at ppt levels in air by alkaline adduct coordination ionspray tandem mass spectrometry

Occupational exposures to isocyanates can lead to occupational asthma. Once sensitized, some workers could react to isocyanate monomers at concentrations below 1% of the Permissible Exposure Limit of 5 ppb in air. Currently available methods are not sufficiently sensitive to adequately evaluate isocyanates present at these levels in workplace air. This article describes a novel method for isocyanate determination allowing the ultratrace quantification in workplace air of hexamethylene diisocyanate, 2,4-toluene diisocyanate and 2,6-toluene diisocyanate monomers. Sampling is performed during a complete workshift at a flow rate of 1 L min(-1) with a cassette containing a 1-(2-methoxyphenyl)piperazine-impregnated 25 mm filter. Analysis is performed using liquid chromatography hyphenated with coordination ionspray tandem mass spectrometry. The analytical method's linearity was measured for a concentration range varying from the limit of detection of 0.04-0.13 ng mL(-1), depending on the monomer, up to approximately 32 ng mL(-1) for every isocyanate monomer, all with correlation coefficients (R(2)) greater than 0.999. The analytical method's lower limit of quantification combined with an adapted sampling strategy allow the quantification of isocyanate monomers down to 0.04 ppt for an 8 h work shift when a lithium adduct is used, which is more than 300 times lower than the most sensitive method currently available. This novel method can be used to confirm the very low level of isocyanate monomers for the safe reassignment of sensitized workers and it is also useful for charting the isocyanate dispersion tail in workplace environments.     

Calculating of river water quality sampling frequency by the analytic hierarchy process (AHP)

River water quality sampling frequency is an important aspect of the river water quality monitoring network. A suitable sampling frequency for each station as well as for the whole network will provide a measure of the real water quality status for the water quality managers as well as the decision makers. The analytic hierarchy process (AHP) is an effective method for decision analysis and calculation of weighting factors based on multiple criteria to solve complicated problems. This study introduces a new procedure to design river water quality sampling frequency by applying the AHP. We introduce and combine weighting factors of variables with the relative weights of stations to select the sampling frequency for each station, monthly and yearly. The new procedure was applied for Jingmei and Xindian rivers, Taipei, Taiwan. The results showed that sampling frequency should be increased at high weighted stations while decreased at low weighted stations. In addition, a detailed monitoring plan for each station and each month could be scheduled from the output results. Finally, the study showed that the AHP is a suitable method to design a system for sampling frequency as it could combine multiple weights and multiple levels for stations and variables to calculate a final weight for stations, variables, and months.     

Removal of Zn and Ni by adsorption in a fixed bed of wheat straw

Zn⁺² and Ni⁺² in a solution were removed by biosorption in a fixed bed of wheat straw Triticum aestivum. The removal rate and the mass transfer coefficient for Zn⁺² and Ni⁺² were found to be proportional to the liquid superficial velocity to the power of 0.31 for the range of the particle Reynolds number from 18 to 445 (equivalent liquid rates of 0.00070–0.0175 m³ m⁻² s⁻¹). This agrees well with reported literature for mass transfer in a packed bed of solid particles under a laminar flow regime. Effect of the solution pH, temperature and the particle size (0.5, 1.0, 1.5 and 2.0 in.) on biosorption of Zn⁺² and Ni⁺² was also investigated. Biosorption of both Zn⁺² and Ni⁺² increased significantly with the solution pH from 4.0 to 7.0. On the other hand, Zn⁺² and Ni⁺² removal appeared to be insensitive to liquid temperature from 25 to 30 °C. Nevertheless, a 25% increase in the percentage removal of metal ions was observed with further increase of liquid temperature from 30 to 35 °C. However, the biosorbent particle size did not seem to have a systematic effect on the biosorption of Zn⁺² and Ni⁺². In addition, biosorption of Zn⁺² was not affected considerably by co-adsorption of the bimetal solution while biosorption of Ni⁺² decreased about 14%.     

An Outbreak of Norovirus Infections Among Lunch Customers at a Restaurant,Tampere, Finland, 2015

On January 29, 2015, the city of Tampere environmental health officers were informed of a possible foodborne outbreak among customers who had eaten lunch in restaurant X. Employees of electric companies A and B had a sudden onset of gastrointestinal symptoms. We conducted a retrospective cohort study to identify the vehicle, source, and causative agent of the outbreak. A case was defined as an employee of companies A or B with diarrhea and/or vomiting who ate lunch at Restaurant X on January 26, 2015. All employees of the companies attending the implicated lunch were invited to participate in the cohort study. Environmental investigation was conducted. Twenty-one responders were included in statistical analysis, of which 11 met with the case definition. Of the 15 food items consumed by participants, four food items were associated with gastroenteritis. Of four kitchen staff, three tested positive for norovirus GIP7, the strain was found earlier in the community. No patient samples were obtained. Level of hygiene in the kitchen was inadequate. Infected kitchen staff probably transmitted norovirus by inadequate hygiene practices. No new cases associated with Restaurant X were reported after the hygiene practices were improved.     

Analysis of Sydney’s recycled water schemes

Recycled water provides a viable opportunity to partially supplement fresh water supplies as well as substantially alleviate environmental loads. Currently, thousands of recycled water schemes have been successfully conducted in a number of countries and Sydney is one of the leading cities, which has made massive effort to apply water reclamation, recycling and reuse. This study aims to make a comprehensive analysis of recycled water schemes in Sydney for a wide range of end uses such as landscape irrigation, industrial process uses and residential uses (e.g., golf course irrigation, industrial cooling water reuse, toilet flushing and clothes washing etc.). For each representative recycled water scheme, this study investigates the involved wastewater treatment technologies, the effluent quality compared with specified guideline values and public attitudes toward different end uses. Based on these obtained data, multi criteria analysis (MCA) in terms of risk, cost-benefit, environmental and social aspects can be performed. Consequently, from the analytical results, the good prospects of further expansion and exploration of current and new end uses were identified toward the integrated water planning and management. The analyses could also help decision makers in making a sound judgment for future recycled water projects.     

Removal of estrogens by electrochemical oxidation process

Treatments of estrogens such as Estrone(E1), Estradiol(E2) and Ethinylestradiol(EE2) were conducted using an electrolytic reactor equipped with multi-packed granular glassy carbon electrodes.Experimental results showed that E1, E2 and EE2 were oxidized in the range of 0.45–0.85 V and were removed through electro-polymerization. Observed data from continuous experiments were in good agreement with calculated results by a mathematical model constructed based on mass transfer limitation. In continuous treatment of trace estrogens(1 μg/L), 98% of E1, E2 and EE2 were stably removed. At high loading rate(100 μg/L), removal efficiency of E1 was kept around 74%–88% for21 days, but removal efficiency reduced due to passivation of electrodes. However, removal efficiency was recovered after electrochemical regeneration of electrodes in presence of ozone. Electric energy consumption was observed in the range of 1–2 Wh/m3. From these results, we concluded that the present electrochemical process would be an alternative removal of estrogens.